Jump to content

UM2+ printjob remains undone but the actual print is finished successfully

llakie

By llakie
in UltiMaker 3D printers

 Share

Recommended Posts

llakie

llakie 0

Posted
Posted (edited) · UM2+ printjob remains undone but the actual print is finished successfully

Hi there,

3 months ago my Ultimaker 2+ started to show a strage behavior at approx. every 2nd print. It finished the print successfully but it was not homing after finishing the last layer. It stayed right above the model, setting a big blob of filament onto the freshly printed model.

I tried to fix this by sending another homing command by using the endscript section in Simplify3D. Now it homes correctly but the display still pretends, that there is 1 more second to go.

I don't know if anything is broken... I checked the firmware already and I'm using the most recent one.

Did anyone of you ever experience such a problem? The printer is one year old by now. Can I somehow send it in for repair? Thanks for your advices in advance. I don't think it's the endstops, because homing works every time now. It has to be something else...

Cheers

Edited by Guest
    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...