Dim3nsioneer 558
Do you have a picture of that cavity by accident? That would be very interesting to see.
Do you have a picture of that cavity by accident? That would be very interesting to see.
Update, turns out it was the nozzle. Some how it got so clogged that I couldn't even blast out the gunked up material with a torch. Soo... I grabbed the smallest drill bit I have and made myself a 1mm nozzle. Prints faster than ever now
Recommended Posts
droopas 0
This sound much like the problem I had recently. After a completed print the filament would get stuck and I had to take out the PFA tube and cut off the end of the filament to a taper and reinsert the tube back.
After a while it got tiring, so I replaced the PTFE coupler. It fixed the problem. Cutting open the old PTFE coupler revealed that it had formed a cavity which allowed the filament to expand, and thus get stuck in the PFA tube.
Link to post
Share on other sites