Jump to content

bird droppings -> Stützstruktur -> Verwenden von Pfeilern


cajodo

Recommended Posts

Posted (edited) · bird droppings -> Stützstruktur -> Verwenden von Pfeilern

If I select Stützstruktur -> verwenden von Pfeilern

AND

select the experimental feature "Anpassschichten verwenden" then the bird droppings will be placed on the base-plate, without touching the model. Here a picture:

5a998f26a7a6e_Bildschirmfoto2018-03-02um18_47_54.thumb.png.b65fdad58cc31100e9e79656202e12bb.png

deactivating the feature: "Anpassschichten verwenden" will remove the droppings. The BIRD I have never seen :o)

-Carsten-

Edited by cajodo
  • Link to post
    Share on other sites

    Posted · bird droppings -> Stützstruktur -> Verwenden von Pfeilern
    On 06/03/2018 at 2:58 PM, cajodo said:

    is this topic read by a developer? -> Carsten

    It is now!

     

    This is a known bug right now. See also https://github.com/Ultimaker/CuraEngine/issues/544

    It's caused (as far as we know) by the Support Use Towers setting in combination with Support Horizontal Expansion. The support area is still passed down to lower layers but it's too slim to print. It should get removed in that case but it isn't. Eventually it somehow becomes wider again (maybe due to the towers?) and then it can be printed again.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...