Jump to content

Dual Extrusion - Move extruder to safe position

amagro

By amagro
in UltiMaker Cura

 Share

Recommended Posts

amagro

amagro 3

Posted
Posted (edited) · Dual Extrusion - Move extruder to safe position

Github Issue #3451

https://github.com/Ultimaker/Cura/issues/3451

 

Application Version
Cura 3.2.1

Platform
Win 10 Pro, 64 bit

Display Driver
NVIDIA GeForce 840M

Printer
Custom printer

Steps to Reproduce
Select a dual extrusion printer and generate the gcode.

Actual Results
After the last extrusion toolpath of one extruder, the extruder will stop on top of the 3D print, waiting for the other extruder to reach the Initial Printing temperature, this could be a 5 seconds wait, and will make a little hole on the print.

Expected results
Move the extruder to a secure place, away from the print.
If a Prime Tower is selected the waiting position could be inside the tower. For a Ooze Shield the position could be xx cm from outside of the shield.

 

37105979-79b8202e-2228-11e8-8fc7-db7b482008da.jpg

BEEVC_2.curaproject.curaproject.3mf

Edited by amagro
    • Link to post
    Share on other sites
    • 7 months later...

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...