Jump to content

Nozzel temp set to zero mid print.


Rene6

Recommended Posts

Posted · Nozzel temp set to zero mid print.

Hi

 

I'm using a builder3d printer with Cura. Latest version. I have some prints where the nozzel temp is set to zero while printing. I actually thought it might be a firmware protection but I recently noticed that there actually is a "M104 T1 S0" command in my g-code after layer 93 in this case. I also printed some other dual color files with similar results but at later layers. I also tried with std profile settings and got same issue. Anybody know this?

 

R

 

IMG_7694.jpg

  • Link to post
    Share on other sites

    Posted · Nozzel temp set to zero mid print.

    So, I tried again, manually removing "M104 T1 S0" from my g-code. Now it prints fine. So:

     

    Good: I know whats wrong

    Bad: Why is Cura adding this line mid-print?

     

    Summary: 

    - I load a file with support and print everything with extruder 1. No issues. 

    - Same file but I select the support to be printed with extruder 2 -> Cura adds "M104 T1 S0" to the g-code. Mid print the nozzel temperature goes to zero and the extruders blocks. Printer keeps going. 

     

    Anybody? As I print dual feed nozzel I have all temperatures set to 200. Incl the standby once. And I use Cura 3.6.0

     

     

  • Link to post
    Share on other sites

    Posted · Nozzel temp set to zero mid print.

    Found a answer:

     

    "

    Yes, Cura turns off the heating for an extruder that will no longer be used for the remainder of the print (something like M104 T1 S0). If there is only one extruder and one heater, then the printer just ignores the T1 and sees M104 S0 and this then turns off the heating currently printing nozzle, causing the print to fail.

     

    "

  • Link to post
    Share on other sites

    Posted · Nozzel temp set to zero mid print.

    And a work around

     

    Extensions -> Post-Procession -> Modify G-Code and select "Search And Replace" as modification.
    Next one can do the following for correct replacement:

    • Search: "M104 T1 S0"
    • Replace ";Removed M104 T1 S0"
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...