Hotend V2 drawings

[gael 0]

Hello all!

I am looking for the drawings for the components of the Hotend V2.

Mainly the PEEK insulator, the PTFE insulator and eventually the brass parts.

I recently had to replace the PEEK insulator as it got deformed. (Although I only print PLA at 220°C max) and the Teflon insulator also got deformed.

I want to machine a peek insulator that should be a bit stronger than the molded version.

Any idea of where I can find the drawings of those parts?

++

Gaël

 

[Daid 306]

http://wiki.ultimaker.com/PEEK_insulator

I think this is the only published drawing right now. My TITAN OpenSCAD design contains the parts but those where modeled from taking measurements from the actual parts (before I worked at Ultimaker), not by using design specs.

 

[gael 0]

Hi David,

Thanks for the link.

Regardig the PEEK insulator, it's fine for me.

If there is no such document for the Teflon insulator, I'll have to take accurate measurements on a fairly soft material....

It the field of keeping the Utlimaker an open-source design, shouldn't those new hotend's standard components be properly documented anyway?

++

Gaël