Ultimaker Power Brick

[ShotgunEmmet 1]

I have an Ultimaker 2+ and the power cable and brick have gone missing after a trade show.

Where do you find is the cheapest place to acquire replacement Ultimaker components?

 

I'm looking at this adapter for https://www.crea3d.com/en/ultimaker-spare-parts/382-power-adapter-24v-220w.html  €121

https://www.lay3rs-retail.nl/nl/ultimaker-power-adapter-24v-220w.html  €147

https://fbrc8.com/collections/ultimaker-2-spare-parts/products/power-adapter-24v-220w  $165

 

Or is there an alternative where the correct interface could be fitted https://www.mouser.ie/ProductDetail/Kycon/KPPX-4P?qs=%2fha2pyFaduhJFFzcGrLglkGGagirOnMaeNKGJCJxtow=

[conny_g 251]

Satisfied with this:
https://www.aliexpress.com/item/Top-Quality-24V-15A-3D-Prnter-Ultimaker2-Power-Supply-Adapter-For-Ultimaker-2-UM2-Extended-3D/32832288123.html

 

[ShotgunEmmet 1]

Would this adapter be compatible with a Ultimaker 2+ https://tinyurl.com/ybs2fr68

 

Doesn't the Ultimaker 2+ specified a 9.2 amps power adapter, would this be suitable?

(I probably didn't see it as I was specifying 220 watts)

Edited January 23, 2019 by ShotgunEmmet

[conny_g 251]

Yes, I use it for my "Magnetic Tool Changer" modded UM2+. Which can use a bit more power as you have two hotends and in my case even two with higher power of 50W each.

The plug is identical, so it's a drop-in replacement. So far I haven't noticed any quality issues.

 

Edited January 23, 2019 by conny_g

[ShotgunEmmet 1]

Excellent, I'll pick it up so, thanks.