Jump to content

Flow Thermostat plugin doesn´t work


bronski

Recommended Posts

Posted · Flow Thermostat plugin doesn´t work

As the Topic says- my Flow Thermostat plugin doesn´t seem to work. I added it to "Enabled plugins" but the temperature doesnt change and some prints start to ooze at small areas. What am I doing wrong?

Some data:

Print Speed 50 mm/s

Cooling fan: enabled

Layer: 0.1mm

Regards!

 

  • Link to post
    Share on other sites

    • 2 months later...
    Posted · Flow Thermostat plugin doesn´t work

    I got the same problem with the Wood plugin, it doesn't change the temp, as far as I can see, the gcode is completely the same with or without the plugin enabled..

     

  • Link to post
    Share on other sites

    Posted · Flow Thermostat plugin doesn´t work

    Just for the case you did not yet find this post: http://umforum.ultimaker.com/index.php?/topic/2454-cura-13064-plugins/&do=findComment&comment=21281 (post no. 8)

    It is a version of the FlowThermostate-plugin which works with Cura 13.06.04+

    You might also try this updated Wood-plugin: https://github.com/Dim3nsioneer/Cura-Plugins/raw/master/Wood1.1.py

    However, you should consider it as beta...

     

  • Link to post
    Share on other sites

    • 1 year later...
    Posted · Flow Thermostat plugin doesn´t work

    Try my update, which solves an issue with the recent Cura updates, by simply disregarding higher feedrates than the "max" calculated by the FlowThermostat plugin. This makes the "printing speed" entry critical, but it ensures protection against high feedrate spikes.

    get it on

    https://github.com/nyyotam/Cura-FlowThermostat/blob/master/FlowThermostat.py .

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...