Jump to content

is it possible to manage a ditto printing with Cura 4.0?


gs1960

Recommended Posts

Posted (edited) · is it possible to manage a ditto printing with Cura 4.0?

 

Hi Guys!

I have a D600 PRO creatbot that already has two extruders, but I have to modify it to make two prints simultaneously.
I read about the ditto print and I think it's my solution.
Can Cura 4.0 handle this type of printing with a double extruder configuration?
I must modify the g-code?
Or do I have to physically modify the electrical connections of the two extruders so that the two connectors join together in the same connector?
Thank you all!

Edited by gs1960
  • Link to post
    Share on other sites

    Posted · is it possible to manage a ditto printing with Cura 4.0?

    Cura has no native way to do this, but I am sure it can be made to support it (for example with one or more postprocessing scripts). The problem is that I have no idea how "ditto printing" is implemented for the D600 PRO creatbot in gcode.

  • Link to post
    Share on other sites

    Posted · is it possible to manage a ditto printing with Cura 4.0?

    I looked up the D600 Pro, but it looks like the dual nozzles are very close together. How do you think this will work if you print two of the same models simultaneously?

  • Link to post
    Share on other sites

    Posted · is it possible to manage a ditto printing with Cura 4.0?

    Thanks ahoeben!
    It is no problem for us to make mechanical changes to Creatbot D600.
    We have already changed some things.
    We just need to understand how to intervene on a software level, because here we have limited knowledge.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...