UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Posted
· Change log of Cura and packaged firmware?
Firmware is still the same, we talked about this last week at Ultimaker, to improve this firmware scenario, detecting which firmware version is on your machine and asking the user only to upgrade if it's outdated.
Changes in the GCode generation: (Compared to 13.06)
* New support material.
* Infill is aligned, so it no longer shifts with the model. Making for stronger infill
* Expert setting: Minimal skirt length, which adds more skirt lines to make sure the nozzle is primed.
* Better handling of 100% infill
* Support material in dual-extrusion can be done with the primary, secondary of both nozzles.
* Option to always retract instead of combing.
* Minimal travel for retraction option
* Some bug fixes for multiple-object printing
Changes in the GUI:
* Add multiple machine settings for when you have more then 1 machine. Each machine has it's own machine size, serial port settings, and a few other configuration settings. This makes it easier to switch between UM2, UM-Original or a RepRap printer.
* Allow dropping gcode/ini files into Cura
* YouMagine upload feature
* (Possible fix for 250000 baud on Linux, untested)
* Show how far the printing is on the 3D window when printing with USB
* Better AMF support for dual-extrusion
There also have been changes for a multi-language Cura, but the only language is English right now.
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
Daid 306
Firmware is still the same, we talked about this last week at Ultimaker, to improve this firmware scenario, detecting which firmware version is on your machine and asking the user only to upgrade if it's outdated.
Changes in the GCode generation: (Compared to 13.06)
* New support material.
* Infill is aligned, so it no longer shifts with the model. Making for stronger infill
* Expert setting: Minimal skirt length, which adds more skirt lines to make sure the nozzle is primed.
* Better handling of 100% infill
* Support material in dual-extrusion can be done with the primary, secondary of both nozzles.
* Option to always retract instead of combing.
* Minimal travel for retraction option
* Some bug fixes for multiple-object printing
Changes in the GUI:
* Add multiple machine settings for when you have more then 1 machine. Each machine has it's own machine size, serial port settings, and a few other configuration settings. This makes it easier to switch between UM2, UM-Original or a RepRap printer.
* Allow dropping gcode/ini files into Cura
* YouMagine upload feature
* (Possible fix for 250000 baud on Linux, untested)
* Show how far the printing is on the 3D window when printing with USB
* Better AMF support for dual-extrusion
There also have been changes for a multi-language Cura, but the only language is English right now.
Link to post
Share on other sites