Cura 4.1 resets printer

[Francocosta02 0]

Hi! i recently updated to Cura 4.1, and i have an issue, i generate the gcode, save it into an SD card, set it to print on my printer (marlin 1.1.9) and just after it finishes printing the skirts it freezes the printer and restarts it. I sliced the same model with the same settings in Cura 4.0 and its printing like a charm.

[burtoogle 514]

Very likely to be the same problem as everyone else is seeing...

.

[Genosystem 0]

Hi, I've the same problem

After the Skirt, the printer restarts.

Works fine in Cura 4.0

I've attached a video

 

Ender / SRK 1.3 / 4xTMC2208 Standalone / Marlin 2.0

video_2019-05-30_00-24-07.zip

[Francocosta02 0]

Not quite, other people is getting it's print paused for a few seconds, mine is resetting, like showing Marlin logo again and temps back to 0, etc... Maybe the cause it's the same, I don't know, but maybe reporting my case can help to fix the problem.