Jump to content

No "Infill before walls" checkbox

HenryDara

By HenryDara
in Improve your 3D prints

 Share

Recommended Posts

HenryDara

HenryDara 0

Posted
Posted · No "Infill before walls" checkbox

Always happens that the "Infill Before Walls" option gets turned off by either of three other settings, Infill Extruder, Infill Density, and/or Inner Wall Extruder. No matter what I do to either of these three setting I dont get the IBW checkbox to show. When I open a new project it shows then, so I try to use those exact settings in the project im working on, but the box still never shows. I am thinking there are other settings that affect this visibility, but they are not documented in Cura. Any help appreciated.

    • Link to post
    Share on other sites
    HenryDara

    HenryDara 0

    Posted
    • Author
    Posted · No "Infill before walls" checkbox

    Has this BUG been addressed? I am convinced Cura is getting jacked up somehow and this setting gets permanently hidden. It's visibility is checked in settings, but it still does not show regardless of any pre-requisite setting (according to the documentation that is) I guess the documentation might be missing a setting that affects the Infill before walls visibility.

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...