3dbenchy issues

[DonaldNaegele 0]

3DPrinter model: Monoprice Ultimate
3DPrinter brand: Monoprice
Modifications: none
Filament type: PLA
Filament brand: Polymaker PLA Plus
Printing Surface: (???)

Slicer: Cura 4.1

Layerheight: .2
Perimiters: 2
Infill %: 10
Bottom/Top thickness: 
Print speed: 50
Extrusion temp: 200
Platform temp (if heated):60

[burtoogle 514]

Hello @DonaldNaegele, without seeing all of the settings you used it's difficult to tell exactly what's wrong. For starters, I would check that you are using no-skin combing mode and set the max comb distance with no retract to something like 10 or 20. There's heaps of other settings that could make a difference. If you provided the project file, that would be a help.

[DonaldNaegele 0]

How do I send you the project file? I'm kinda new to Cura?

[DonaldNaegele 0]

My distance is set at ZERO.

 

Don

[DonaldNaegele 0]

I did a save and it made a .3mf file. Is that what you need?

 

Don

[burtoogle 514]

Do a File -> Save and just attach the .3mf file to this thread.

[DonaldNaegele 0]

MU_3DBenchy_-_Multi-part_-_Complete_17_shells_-_3DBenchy.com.3mf

[burtoogle 514]

Thanks for the file. I think a big part of the problem is that the model is not good. It appears to be made from a number of meshes and it should be a single mesh.

 

 

You can see in the image that the mesh tools plugin is unhappy (let's face it, a benchy that isn't watertight is about as much use as a chocolate frying pan!)

 

Looking at the layer view behind you can see that something is screwy with the door frame.

 

So, first step, fix the model.

 

[DonaldNaegele 0]

Im lost on how to fix the model? I don't see mesh tools anywhere?

 

Don

Edited July 29, 2019 by DonaldNaegele

[DonaldNaegele 0]

This:

 

 

[burtoogle 514]

The mesh tools are a plugin you install from the Cura marketplace.

 

How you fix the model is beyond my knowledge, sorry.

 

Most likely you will need to fix it before loading it into Cura.

[DonaldNaegele 0]

Plugin and profile installation

To install a plugin or profile from the Marketplace, take the following steps:

• Open the Marketplace in Ultimaker Cura by navigating to Marketplace > Marketplace.
• Select the plugin or profile you want to install and click Install.
• Quit and restart Ultimaker Cura to enable the plugin or profile.

 

I don't have these options in my Cura for Mac.

 

Don

 

 

[DonaldNaegele 0]

Ok I ran all the mesh tools. Should I just try and reprint?

 

Don