S5 First Print and Expansion?

Belezeebub · 2019-08-18T05:10:14+0000

I ended up getting the S5 it should be here week after next, I feel like I am 6 again and its Christmas morning. (but I digress) at about 25:20 on this video an Expansion for the S5 is hinted at its over a year later anyone have a clue what it is? I want to print the Gyro orb showed in just about every dual extruder demo for a Ultimaker printer anyone that has printing it want to share the settings you used?

By Belezeebub
August 18, 2019 in Ultimaker 3D printers

Followers 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign in

Already have an account? Sign in here.

Followers 1

Go to topic listing

Our picks
- UltiMaker Cura 5.3 stable released
  
  ArunC posted a topic in Ultimaker Cura, March 13
  In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!
  
  26 replies
  Picked By
  MariMakes, March 13
- Here it is. The new UltiMaker S7
  
  MariMakes posted a topic in Official news, January 24
  The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
  
  So what’s new?
  The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
  
  The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
  
  The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
  
  The UltiMaker S7 also includes quality of life improvements:
  Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more
  Curious to see the S7 in action?
  We’re hosting a free tech demo on February 7.
  It will be live and you can ask any questions to our CTO, Miguel Calvo.
  Register here for the Webinar
  
  18 replies
  Picked By
  MariMakes, January 24
- Cura Alpha With New Tree Support 🎄
  
  MariMakes posted a topic in Ultimaker Cura, December 22, 2022
  Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
  
  We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.
  
  22 replies
  Picked By
  MariMakes, December 22, 2022
View All