Fantastic -- that solved it! I (almost) feel stupid for having to ask. Thanks for the tip!
Carla_Birch 116
When its lifted and lowered i started to get the same sound after a number of months so i rubbed some the grease into the lifting mechanism and flicked it up and down a few times by hand and rerun the calibration and the sound went away.
20 hours ago, PilotChris said:Fantastic -- that solved it! I (almost) feel stupid for having to ask. Thanks for the tip!
I had to ask when it happened to me, too. 🙂
Recommended Posts
johnse 31
I had this happen on my UM3. The switch on the side of the head was rubbing against the black bracket that connects the x-axis rod to the belts.
you just need to run the calibration routine for this.
https://ultimaker.com/en/resources/39666-lift-switch-calibration
Link to post
Share on other sites