3DBenchy ceiling roof bridge. Cura 4.3.0

[Mindspeed 0]

Hello Everyone

Could someone suggest me how to tweak Cura settings to print the ceiling (first layer of the roof) the roof of 3DBency boat.

I've enabled Experimental "Enable Bridge Settings".

You see the marked line prints completely in the air and seems like it doesn't detect the empty space below!

 

To have a straight lines instead of diagonal I've tried to turn Alternate Skin Rotation but with no success.

 

I would like to have similar to Prusa Slicer bridge behavior:

 

 

Please suggest if there are some options to tune printing the roof ceilings?

 

 

[burtoogle 514]

Hello @Mindspeed, please attach the model file so that I can slice it for comparison. Thanks.

[Mindspeed 0]

8 minutes ago, burtoogle said:

Hello @Mindspeed, please attach the model file so that I can slice it for comparison. Thanks.

It is here https://www.thingiverse.com/thing:763622

Famous 3DBenchy.

thanks for your interest!

[burtoogle 514]

Ah, I just found a benchy file, I didn't know I had it. Looks fairly similar to what you have above.

 

Have you tried adjust the bridge skin support threshold setting?

Also, I would set the skin wall line count to 0.

[Mindspeed 0]

5 minutes ago, burtoogle said:

Also, I would set the skin wall line count to 0.

 

Wow, much better

 

And I would just happy if I will manage to make the lines perpendicular on this layer