Jump to content

Cura 4.4 Stops printing after layer 2

9thoracle

By 9thoracle
in UltiMaker Cura

 Share

Recommended Posts

9thoracle

9thoracle 3

Posted
Posted · Cura 4.4 Stops printing after layer 2

Hi everyone!

 

Not sure if this is a known issue currently but I figured I would post about it just in case.

 

Currently, I imported a profile for my Carbon Fiber HTPLA from when I used Cura 3.6

 

When the print gets to Layer 3 or so, the Feeder motor stops, the hotend cools down, and the print bed cools down. The print head and program otherwise keep running as if nothing has changed.

 

Im going to try and create a brand new profile in Cura and see if that fixes it. I am thinking maybe something about importing the old one is what messed it up but we will see.

 

I will post back if I figure anything out. Otherwise input from others is totally welcome!

    • Link to post
    Share on other sites
    9thoracle

    9thoracle 3

    Posted
    • Author
    Posted · Cura 4.4 Stops printing after layer 2

    Fixed it!

     

    Since I had brought in old printer profiles from the previous version of Cura, I deleted them and started with a fresh Printer profile and Material profile. Fixed all the issues I had. And it looks like its printing even better than before. 

     

     

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...