Prints stopping at certain height

[castlenut 0]

Hi everyone, I am new to 3-d printing and have a Sunlu s8.  Please bare with me as I try to explain this.  I am trying to print a 'baby groot' and the printer just stops at z 149 and flashes.  I had something similar happen on another print and thought it was because I ran out of filament.  

 

I tried to edit the gcode to continue printing where it left off, but noticed the max z height set in the gcode is 149.  I have the print machine settings set to the maximum of the machine which I believe is 400mm.  Any idea why the gcode is printing at something smaller?

 

;MAXX:236.426
;MAXY:201.549
;MAXZ:149.9

 

 

Thanks in advance.

[burtoogle 508]

Hello @castlenut, please save the project file (File -> Save) and attach the .3mf file to this thread. Thanks.

[castlenut 0]

Toad.3mfsitting-groot-v1-1.3mf

 

Hi I uploaded the files.  I had the same issue with 'toad', where it stopped near the end of the print.  I think I figured out that the z max height in the gcode is the max height of the object?  I tried to continue the print and realized when I put the number that was blinking on the machine, it took it to the top of where the print should have finished, which was also the z height max listed in the gcode.

 

Thanks for your help.

[burtoogle 508]

Thanks for the files. As they don't include the models it's hard to say if there is a problem or not.

[castlenut 0]

sitting-groot-STL.stlToad-STL.stlCFFFP_Toad.3mf

 

Okay, I guess I don't understand what you need - sorry.  I uploaded the stl files and the stl files I saved as the 3mf.  Let me know if I'm off and I will get you what you need.  Thanks.

 

 

sitting-groot-v1-1.3mf