Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  
ricardoga

Cura 13.11.2 random z movement

Recommended Posts

Hello everybody i have a problem with the new version of cura 13.11.2 it add a random movement of the z axis at the end of the gcode and also add some random retraction both after the comando M107 and before the end gcode

 

I check my profile and try restoring the default settings importing the old profile creating a new profile i check with differents stl files and all with the same issue

 

as example the calibration cube 20X20 at the end add this

 

Cura 13.11.2

 

G0 F7200 X80.65 Y85.91

G1 F4800 X80.91 Y85.65 E266.81007

M107

G1 F2400 E259.81007

G0 F7200 X80.91 Y85.65 Z15.00

M104 S0

M140 S0 ;heated bed heater off

G91 ;relative positioning

G1 E-7 F300 ;Retract 4 mm

G28 X0 F7200 ;move X to min endstop

G1 Y195 F7200 ; move Y to max position

M84 ;steppers off

G90 ;absolute positioning

G92 E0 ; reset extrusion distance

 

and if i slice the same file with the same parameter in cura 13.06.4 i get the gcode without the error

 

Cura 13.06.4

 

G0 F7200 X99.07 Y104.35

G1 F4800 X99.35 Y104.07 E247.80150

M107

M104 S0

M140 S0 ;heated bed heater off

G91 ;relative positioning

G1 E-7 F300 ;Retract 4 mm

G28 X0 F7200 ;move X to min endstop

G1 Y195 F7200 ; move Y to max position

M84 ;steppers off

G90 ;absolute positioning

G92 E0 ; reset extrusion distance

 

I leave you the links of my gcodes (cura 13.06.4 and 13.11.2) and also my profiles

 

thanks in advance

 

http://www.mediafire.com/view/9e2ku89qz1lz681/Cube%20Cura%2013.11.2.gcode

http://www.mediafire.com/view/xs97o05umx9220i/Cube%20Cura%2013.06.4.gcode

http://www.mediafire.com/view/40b497ubalb2z02/Prusa%20i3%20Cura%2013.11.2.ini

http://www.mediafire.com/view/38bz41ph29c7php/Prusa%20i3%20Cura%2013.06.4.ini

 

Share this post


Link to post
Share on other sites

It does a retract and move up, to ensure it's above the print and no longer on the print.

It does this also for multi-object prints, to ensure the hotend is above all the objects.

(It's not really a random move, it's quite intentionally added)

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Taking Advantage of DfAM
      This is a statement that’s often made about AM/3DP. I'll focus on the way DfAM can take advantage of some of the unique capabilities that AM and 3DP have to offer. I personally think that the use of AM/3DP for light-weighting is one of it’s most exciting possibilities and one that could play a key part in the sustainability of design and manufacturing in the future.
        • Like
      • 3 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!