Jump to content

Noob - looking for simple explanation - What is skin ?


paTish

Recommended Posts

Posted (edited) · Noob - looking for simple explanation - What is skin ?

"Skin" generally refers to the top and bottom layers.  Sometimes the word "mesh" is used (but a Mesh can also refer to a model in Cura).  If you are printing a solid box (no lid or opening on the top) the "brim" or "Skirt" get printed first around the periphery of the model.  Brims help hold models down.  Skirts just get the plastic flowing (and can give you a look at how level the bed is).

Next the walls get printed.  If you have a .4 nozzle and the line width is set to .4 then the wall thickness should be a multiple of the line width.  A wall 1.2 wide will take 3 passes - 2 inner-walls and then 1 outer-wall.  If the setting for "additional wall" is checked then after the outer-wall the print head will go around the inside one more time and add a 3rd inner wall.  The printer will then print the bottom "Skin" by filling in the entire area between the walls.  in the case of the box, it's the bottom layer you will be able to see when the print is done and off the build plate.  It is the base for the whole print and it's critically important that it goes down right and adheres to the build plate.

The printer keeps adding walls around the outside, and skins on the inside until the Bottom Thickness and/or Bottom Layers is reached.  As the print goes up from there, the walls keep going (except for the Additional Wall" which is only for skin) and "Infill" takes the place of "skin".  Once the print gets to the top of the box, skin replaces the infill and you want the last skin to look nice so you might even iron your skin.  That is the S&M part of 3D printing that nobody ever really talks about.

Do you need skin?  No.  If you slice the box with top layers set to "0" it will not have a top skin and the infill will go right to the top of the walls.  If you then set Infill to 0, you will have an empty box with no top.  If you set bottom layers to 0 you will print a rectangular tube - no bottom, no top, no infill.

Time to hit Thingiverse (you can get there from inside Cura) and get a calibration cube to play with.

 

Always remember that the #1 use of pigskin is not the making of American footballs.  The #1 use of pigskin is to hold pigs together.

 

Edited by GregValiant
  • Link to post
    Share on other sites

    Posted · Noob - looking for simple explanation - What is skin ?

    Wow @GregValiant THANKS for that thorough explanation.

     

    You're saying that the layers printed on the bottom and top of the model, excluding the inner and outer walls are the skin (am I correct ?). I'm still confused though, under the shell category there is no way to set number  or thickness of skin (just top surface skin layers), but I can change Top\Bottom thickness. I'm concluding that there are  Top\Bottom layers (adjustable thickness ) and skin layers (non adjustable thickness), my question is what is the difference  or relationship between Top\Bottom and skin ?

  • Link to post
    Share on other sites

    Posted · Noob - looking for simple explanation - What is skin ?

    I guess it's a question of semantics.  The number of "topmost skin layers" can be set.  I would think that is the "show" surface(s).  The layers just below would be, well, layers.  The "Skin Layers" can have a separate speed setting and can be ironed to enhance the finish.  

     

    The bottom surface picks up the pattern of the top of the build plate and it's facing down so nothing can really be done with it to enhance the finish.  Maybe that's why in Cura it isn't considered a "skin".  Maybe it would be a "sole"?

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...