The holes are clogged with CURA 4.8

[Nobeal85 0]

Hello

The piece is well read but if I present it flat the holes are all clogged.

If I present it aside, the holes are well respected.

I own 2 printer 3Ds. A ZORTRAX M200 (only from the ABS) An ANYCUBIC S (only PLA)

The Z-suite software is really well done and I use it to validate my parts.

I use CURA 4.8.0 for ANYCUBIC. I don't understand why some surfaces are red in CURA while they go very well in Z-Suite.

I draw my parts with RHINO 6, and I printed over 300 parts with my ZORTRAX. ANYCUBIC is more recent.(2 months)

Thank you for your help

 

Edited November 27, 2020 by Nobeal85

[GregValiant 1,110]

If you could post the STL file someone will take a look.

Cura marks areas that need support in red.  There might be something wrong with the model (normals flipped upside down or something) that is causing Cura to read the part wrong.