Jump to content

UM2 not waiting for heated bed


cor-kiekens

Recommended Posts

Posted · UM2 not waiting for heated bed

Hi there, i have question:

I have received my UM2 last week :-P :-P :-P :-P :-P :-P

And as for cura, i switched it to "rep/rap marlin" type G-code... (just because i'm a control freak i guess)

But i just cant get my printer to wait until the bed temp is reached.

i editted my start code:

like this:

;Sliced at: {day} {date} {time}

;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}

;Print time: {print_time}

;Filament used: {filament_amount}m {filament_weight}g

;Filament cost: {filament_cost}

M190 S{print_bed_temperature}

M109 S{print_temperature}

G21 ;metric values

G90 ;absolute positioning

M107 ;start with the fan off

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G1 Z50.0 F{travel_speed} ;move the platform down 15mm

G92 E0 ;zero the extruded length

G1 F200 E20 ;extrude 20mm of feed stock

G92 E0 ;zero the extruded length again

G1 F{travel_speed}

;Put printing message on LCD screen

M117 Printing...

 

But it still does not wait until bed temp is reached???

also it does not properly fill in the parameters such as print date and used filament length...

See my g-code example:

 

;Generated with Cura_SteamEngine 13.11.2

;Sliced at: Sat 21-12-2013 15:37:32

;Basic settings: Layer height: 0.1 Walls: 1.2 Fill: 20

;Print time: #P_TIME#

;Filament used: #F_AMNT#m #F_WGHT#g

;Filament cost: #F_COST#

M190 S60

M109 S210

G21 ;metric values

G90 ;absolute positioning

M107 ;start with the fan off

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G1 Z50.0 F15000 ;move the platform down 15mm

G92 E0 ;zero the extruded length

G1 F200 E20 ;extrude 20mm of feed stock

G92 E0 ;zero the extruded length again

G1 F15000

;Put printing message on LCD screen

M117 Printing...

 

;Layer count: 149

;LAYER:0

M107

G0 F7500 X51.59 Y118.45 Z0.30

;TYPE:SKIRT

G1 F2100 E0.00000

G1 F1200 X51.93 Y118.33 E0.00615

G1 X52.72 Y118.11 E0.01987

 

 

Any ideas????

 

Greetzzzzz Cor

 

 

 

 

  • Link to post
    Share on other sites

    Posted · UM2 not waiting for heated bed

    Regarding waiting for the bed daid said this on the 9th of December when I pointed it out:

    "Bug in the firmware, I made a mistake and this swapped the "wait for heating" to "wait for cooldown" on the bed M190 command. I've fixed it for the next version. I've been running into the same problem with my Doodle3D experiments."

    So it should hopefully be fixed soon. In the mean time you can manually heat the bed via the Maintenance menu. I usually start heating the bed when I sit down to do the slicing so it's close to hot when I want to start printing.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...