Didn't seem to help. I'll try to lower the bed a bit more and eventually add glue. Somehow the whole head vibrates during some part of the print. It seems as if it is too close to the bed.
Good print (2 days ago) on the left and bad print on the right today, despite extra measures e.g. leveled plate few times, added adhesion as visible behind the bad print, added glue on the plate.
I'm now checking the room temperature (to be between 20 and 30 celsius) but somehow I can't imagine that'd be a link to the distance and new noise.
Edited by utopiahadd photo with comments
Recommended Posts
utopiah 3
Well.. apparently I still need to learn how to turn screws the right way! I'll blame my excitement 😉
Adjusted the plate properly now, starting a new print to test but should be all good. Sorry for the noise!
Link to post
Share on other sites