Jump to content
UltiMaker Community of 3D Printing Experts

Ultimaker 5s for sale, superb condition, all maintenance performed by the book


Recommended Posts

Posted · Ultimaker 5s for sale, superb condition, all maintenance performed by the book

 Ultimaker 5s in excellent condition. Only a couple reels of filament pushed through. FYI, in order to use PVA effectively you must have a material dryer running almost 24/7 (unless you unload the PVA and vacuum seal it with dessicant). I will include the dryer I use at no additional cost to you and a filament splicer. I couldn't get the splicer to work, but the people on YouTube certainly did so it is possible. I vacuum sealed all open filament with dessicant. Included are the unused ruby red nozzle, new reels of black nylon, PA/CF (carbon fiber), black PLA tough; partial reels of black PLA tough, PVA natural. I'll add pics of the hours of the print cores and condition of the axles, and print bed (one side of the print bed has a small chip. I ordered an extra bb 0.4 print core, which hasn't arrived yet, it is of course included for free! What a bargain! Brand new, you're looking at over $7500. Right now, the low low price of $5000. I'll do a special November discount, $4,990 for the first 5 people who inquire. Better hurry, it's on Craigslist too (same price) and I've already got interested parties. Don't miss out on the bargain of the century! 

 

20211030_073610.thumb.jpg.a432cea1ad40e50eeed4a31c6b86e345.jpg20211030_074244.thumb.jpg.80e0a280ec29d96f55cd2c326839aa19.jpg20211030_074117.thumb.jpg.fe6775b313ec631cd6773152f00f5945.jpg20211030_074218.thumb.jpg.48e0194abff4726bc3a567d4bd9376d5.jpg20211030_074100.thumb.jpg.c9a475bfd525127f4e43accb0f94e931.jpg20211102_191404.thumb.jpg.b3c2ae17836e6902505ec249e4508921.jpg20211030_074147.thumb.jpg.391418b973188465ac8616de7c0cc489.jpg20211030_073804.thumb.jpg.b93e61ca4cf00e110aaf517ca8140087.jpg

20211102_191431.jpg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • Here it is. The new UltiMaker S7
        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
         
         
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
         
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
         
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
         

         
        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
        • 10 replies
      • UltiMaker Cura 5.3.0-Alpha 🎄 Tree Support Spotlight 🎄
        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
         
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
        • 16 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 14 replies
    ×
    ×
    • Create New...