-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
dmitche3 0
The laptop will need the proper drivers to access your printer via the USB ports. What make of print is it? Search online for "3d Printer drivers". I know for my ender 3 V2 there is one that I use that comes from China. It made me nervous to install it as everything was in a Chinese language, but as everyone else uses it and there was no alternative..
Assuming that you are running Windows you should see in the Device Manager under Ports an entry. Once the driver is installed it should indicate that a 3D printer is connected. I recommend using Ponterface to setup the printer and to use it for printing. You have to get the proper serial speed to communicate with the printer.
Link to post
Share on other sites