Jump to content

Priline Carbon Fiber Polycarbonate

Dilli90
 Share

Recommended Posts

Dilli90

Dilli90 0

Posted
Posted (edited) · Priline Carbon Fiber Polycarbonate

Hello everyone,

                             I am rather new here to this forum so sorry if this topic has already been covered, I picked up a roll of Priline's carbon fiber polycarbonate and i can not find an exact setting in cura for this material i just went with the generic version, of this tried adding it to cura via market place but some reason it's not quite working, i have a profile saved to run my cfpc. I am going to be diving into some functional parts for a 3d printer upgrade and wanted to get my setting better and came here to look. Priline isnt a company that cura has in their data base i guess because I tried many times to look for this brand. Any input is greatly appricated, i will continue with my saved profile and test a few others. I ran quite a few prints with this material even made a fang and mounted it to my cr10s5, it needed to be able to withstand high temps as it is fastened to the heat exchanger, has worked great just looking to improve upon my prints and looking into the slicer software.

Edited by Dilli90
    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...