Jump to content

Recommended Posts

  • 3 weeks later...

Not so dumb. Cura will "slice" your file to print, either an STL, 3MF, etc.  This will generate the G-Code that the printer uses.  You can use the preview (RECOMMENDED) to see what is actually going to print as sometimes you don't always get what you expect.

Once you have sliced your part, you then can either use Cura to print from the software or you can save the G-Code to a file.

If you choose to save the  file you'll need to put it on a media that your printer supports.  Typically and SSD or Micro-SSD card slot is located on the printer.  From there your printer can load the file and process the files.

 

The downside of printing from Cura or programs like Ponterface is that your Chromebook would need to be connected to the printer, via a USB or Wi-Fi and can't go to sleep.  I print from my laptop using Ponterface as it gives me more control over the printing. It's a great program that lets you set up macros so that you'll never need to touch the dials on your printer again. 

  • Link to post
    Share on other sites

    • 5 months later...

     

    If you're new to 3D printing, the thought of using Cura can be daunting. It's a powerful program with a lot of features, and it can be tough to figure out where to start. One of the most common questions we get is "How do I upload a file to the build plate in Cura?"

     

     

    The answer is actually pretty simple, but it's easy to miss if you're not familiar with the interface. Here's a quick step-by-step guide to help you get started:

     

     

    1. Open Cura and click on the "File" menu at the top of the window.

     

    2. Select "Open" from the drop-down menu.

     

    3. Find the file you want to print and click "Open."

    4. The file will now appear in the "Build Plate" window.

    5. To print the file, click on the "Print" button at the bottom of the window.

     

    That's all there is to Rockwool RWA45 100mm! If you have any other questions about using Cura, be sure to check out our other articles or contact us for more help.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...