UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
Ikaru31 0
If there is someone also trying to use cura on a Bfb 3d Touch here is how i managed it to work:
create a standard fff-printer in cura
change start gcode to:
^Checksum: NO
^Time: 1234
^Ex1: PLA White
^Ex2: PLA white
^Ex3: None
M227 P3200 S3200
M105
M113 S1.0
change end gcode to:
M103
(</nestedRing>)
~M104 S0
M113 S0.0
Change extruder 1 Start gcode to:
;extruder 1
M106
M542
;start extruder 1 extruding
M107
M104 S{material_print_temperature_layer_0}
M106
M551 P57600 S600;priming p-extrudingmass s-speedofextrusion
M543
M101
Change extruder 1 end gcode to:
M103
Change extruder 2 Start gcode to:
;extruder 2
M542
;start extruder 1 extruding
M107
M204 S{material_print_temperature_layer_0}
M106
M552 P57600 S600;priming p-extrudingmass s-speedofextrusion
M543
M201
Change extruder 2 end gcode to:
M103
Printer settings:
x 395.0
y285.0
z201.0
origin at center
gcode Flavour
Bits from bites
Nozzeloffset x extruder 2 50mm
Print settings custom expert:
flowrate to arround 4700
uncheck infill bevore wall
Buildplate adhesion :none (Change in flowrate strangly does not apply here so its not extruding the raft until you change it manually)
slice your stl and save gcode
open the stl with notpad or simillar
open an .bfb made with axon and delete everything
Copie the gcode from cura in the .bfb file and save. This is necessary to avoid an file read error, may be possible to do otherwise.
At the printer settings of the bfb you have to uncheck the chek file before printing
Link to post
Share on other sites