A few bugs with cura 5.3.0.

[Mince_Pie 0]

Hello everyone! 

First of all, ArcWelder doesn't work in cura 5.3.0. I tried on 3 different PC's, and in all cases sliced models were looks like on picture 1.

The next problem is Initial XY positions for printing with dual-extrusion mode. Iam using klipper, and its has a "save_gcode_state" and "restore_gcode_state" functions, in this case i dont need initial XY position, it would be cool to be able to disable this option(Picture 2).

Broken_arc_welder.3mf

Edited March 21, 2023 by Mince_Pie

[dhudson15 0]

Same here, I turned off Arc w Weld for now..  

[ahoeben 1,963]

On 3/21/2023 at 11:08 PM, Mince_Pie said:

First of all, ArcWelder doesn't work in cura 5.3.0. I tried on 3 different PC's, and in all cases sliced models were looks like on picture 1.

 

The ArcWelder plugin actually works, but Cura just cannot display the G2/G3 curves that the plugin creates. Cura itself does not create G2/G3 commands, so the display of those commands was never implemented.