Need help, troubleshooting from picture

[nebojsar 0]

Hello all,

               I have Ender 3 S1 pro, using 0.25 nozzle as I'm printing very thin parts. I was doing various settings testing and managed to print one fin perfectly (first on the left)

and after the next use my sd card failed, I did not manage to save cura settings. During my next attempts I constantly have artifacts in the form of additional extruded material which is shifting from front to back. I'm printing this item vertically with support. I tried many versions of Cura (seems 4.9 works best) and many many settings including turning off "restart after power failure" but still not having luck to eliminate artifacts. From above it looks like that cura added some additional material in places where they occur. Any idea which setting I might tune-up to eliminate this issue?

fin 025 ver10.gcode