Thank you for your quick reply.
My system specs are; Intel I3-8100 CPU@ 3.60Ghz running 32Gb RAM.
The graphics card is Nvidia GeForce RTX3050 with 8Gb RAM. Windows 11 Operating System
Storage is in excess of 3TB.
I noticed the problem when moving items across the print bed.
For some reason, I cannot find the log file %APPDATA\cura\5.4\.
I hope I have given you enough info.
Thank you again
Recommended Posts
Slashee_the_Cow 457
Could you please find the cura.log file in %APPDATA%\cura\5.4\ and upload it?
Some more information about the behaviour would be useful, i.e. does it happen when you're doing anything in particular, like moving items on the build plate, or during slicing, or just at random occasions?
Also, some more system information where possible, i.e. do you have a graphics card or are you using the integrated graphics in your processor? I checked and the integrated graphics in your processor do support a high enough version of OpenGL, but Intel integrated graphics are notoriously slow; also in some systems using integrated graphics the amount of memory dedicated to the graphics can be changed in the BIOS and if it is set low that will significantly affect performance. Someone else might have more recent experience than me here, I haven't used a system with both a processor and chipset that support integrated graphics in over a decade.
And please make sure your computer meets the minimum requirements.
Link to post
Share on other sites