Jump to content

Pieces of model disappear upon slicing.

Beelzemon

By Beelzemon
in UltiMaker Cura

 Share

Recommended Posts

Beelzemon

Beelzemon 0

Posted
Posted (edited) · Pieces of model disappear upon slicing.

Cura version 4.13.1.  I found this model and managed to get rid of the manifold errors and make it printable.  Unfortunately, when I go to try and slice the model, pieces of the model disappear after I slice.  Any idea what could be causing this issue and how I might go about fixing it?  I included the STL file for reference.

STL after fixing manifold issues:

image.thumb.png.46a98ecfb5663aec254d2977216263d3.png

Model after Slicing:

image.thumb.png.db2d118ab4f0d86cf7dd993690eeb657.png

CresGaruru.stl CE3PRO_CresGaruru.3mf

Edited by Beelzemon
Incorrect Cura version
    • Link to post
    Share on other sites
    Slashee_the_Cow

    Slashee_the_Cow 271

    Posted
    Posted · Pieces of model disappear upon slicing.

    I think there's a lot of pieces that are just going to be too fine for your printer to be able to manage.

     

    You can try and save some of it by going to Mesh Fixes > Maximum Resolution and turning that down (I usually leave it on 0.1mm).

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
        • 20 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...