Gcode settings

[gaw 0]

Hi

Could someone possibly send me a photograph of the cura gcode settings required for a sllced model to achieve a print on a creality ki.

I was getting on OK but I had to reboot my hard drive and lost the cura set up. I had inserted some gcode lines at the beginning and end of the gcode list following advise from another but I failed to keep a record and am now lost. I have found the 4.6.0.cura version I was using  but it is not showing the amended codes I need. I would be most grateful

[Slashee_the_Cow 272]

A photo? Wouldn't it be easier to just write it so you can copy & paste?

 

What is the exact problem you're having?

[gaw 0]

I just thought it would be easier to take pic. I have not solved the problem which is: A downloaded to disc model will not get the creality k1 printer to start printing. Previously solved by adding code in cura to the start of rhe download. I have lost the lines I added and creality cannot find what they sent me

Regards

[Slashee_the_Cow 272]

If you could upload a gcode file made now that doesn't work and an older one that works we can compare them to see if there's any obvious differences for things you'd need to change.