21 hours ago, gr5 said:When I go to material (right menus) and then settings and "hover" on PLA I see it says 2.85 for the filament diameter but I think that's only for one nozzle. I recommend you go to the bottom and do "export to SD" (or some similar wording) and then bring the sd card back to a computer and look at the file it created and make sure you have 1.75 for filament diameter everywhere. I'd just edit it in any text editor, put it back on the SD and then import it back into the printer.
This is how you set the filament diameter on the printer (posted yesterday on this topic).
So it sounds like it's printing 2.6X too slow (2.85^2 / 1.75^2).
Another check would be to set the flow to 265%. But just fix it in the materials settings on your printer.
Recommended Posts
adamjvr 0
I actually have been using Ultimaker 2 Gcode flavor from the start which is why I'm so confused. How do I set the filament diameter on the machine itself ? Also I have been printing with SD Card the entire since USB printing has always been pretty unreliable in my experience.
Link to post
Share on other sites