Thanks i will try to replace the wiring for a start.
any1 can help me with the specs of the wire? There are 2 black and 2 grey wires connected from the PCB to heated bed.
Think there is a common problem with the connector to the HB. Can re-solder if you have a big enough iron (heat soak it huge). If not, I think a few guys made a warranty claim. Better to fix yourself if can though (especially with having to post back from singapore. Think there are a few posts on it.
Recommended Posts
Daid 306
The LED will turn on when it tries to turn on the heater. So if the bed does not warm up it's most likely a problem with the heater or the wiring.
Link to post
Share on other sites