Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  
akk4rin

UM2 OLED edisplay broken

Recommended Posts

Hi there,

let's say we broke the OLED display of our UM2 (we bought it for our company). I am an electronics engineer, so I am to replace the display. Can you tell me where I can buy this display or send me one and we pay for it. I found one that has the same pinout (PG-2864ASWCG01) but it is smaller and white not blue (which would not be too bad). I reckon the right part number is PG-2864ALBP but I can't find it anywhere. I also found one that is the same size but it has 31 pins (which seems to be normal for OLED's of this size) not 24 as the one that is in the UM2 .

Thanks in advance.

Jan

 

Share this post


Link to post
Share on other sites

Hi Jan,

Welcome to the forum.

You can find the assembly manual here. Check page 41 for the display assembly:

https://github.com/Ultimaker/Ultimaker2/blob/master/um2%20assembly%20manual%20V1.1%20_english.pdf'>https://github.com/Ultimaker/Ultimaker2/blob/master/um2%20assembly%20manual%20V1.1%20_english.pdf'>https://github.com/Ultimaker/Ultimaker2/blob/master/um2%20assembly%20manual%20V1.1%20_english.pdf'>https://github.com/Ultimaker/Ultimaker2/blob/master/um2%20assembly%20manual%20V1.1%20_english.pdf

And the part descriptions here:

https://github.com/Ultimaker/Ultimaker2

The display part doesn't have much info:

https://github.com/Ultimaker/Ultimaker2/tree/master/1247_Display_(x1)

Consider contacting UM support for replacement part

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Taking Advantage of DfAM
      This is a statement that’s often made about AM/3DP. I'll focus on the way DfAM can take advantage of some of the unique capabilities that AM and 3DP have to offer. I personally think that the use of AM/3DP for light-weighting is one of it’s most exciting possibilities and one that could play a key part in the sustainability of design and manufacturing in the future.
        • Like
      • 3 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!