Hola hacalox.
La TAZ no está vendida. Si te interesa me lo dices. Saludos!
Pues ya te lo digo ahora, dime algo a h_calos@hotmail.com y quedamos para la semana que viene si te parece. Saludos
Hola.
La TAZ está en su caja y no en Barcelona sino en Bilbao.
Yo estaré en Bilbao desde este Viernes hasta la semana siguiente.
Si te interesa al precio de arriba te la puedo mandar desde Bilbao.
Saludos.
Cuánto tiempo tiene? Horas de uso? Si la envias aqui con contrareembolso por 1400 me la quedo.
Hola hacalox.
Tiene unas 20 o 30 horas de uso. Se compró en Enero en UK. Ha estado en su caja casi todo el tiempo.
La impresora viene en 3 partes, el armazón, la bandeja y el extrusor. Se monta todo en unos minutos sin necesidad de usar ninguna herramienta. Se acompaña de una bolsita con herramientas (que están sin tocar), un manual gordo de instrucciones, una guía rápida y una caja con material diverso. Todas las piezas están metidas en unas molduras de foam.
La bandeja no tiene la lamina de plastico de aherencia de PET que viene originalmente. La quité porque es horrible trabajar con ese material. Hoy día Lulzbot pone PEI en lugar de PET y es lo que aconsejan poner. Por supuesto puedes poner lo que quieras o trabajar sobre el cristal directamente(no recomendado). Yo solía poner un segundo cristal porque a mi me gusta sacar la bandeja para quitar las piezas.
El precio sería el que indico arriba 1495 más portes, no negociable. El medio de transporte lo puedes elegir tú mismo aunque yo te aconsejo SEUR. El paquete mide 77x62x35 y pesa 20Kgs por si quieres calcular el coste tu mismo. Te lo mandaría previo pago por transferencia. Si te interesa reembolso también lo puedo hacer pero que sepas que los mensajeros cobran comision por el reembolso. Si te interesa me mandas un PM con una dirección de email donde te pueda contactar para pasarte los datos del pago. Saludos.
No te envio mp porque no sé como hacerlo, pero yo ya te he facilitado mi correo en mensajes anteriores.h_calos@hotmail.com
Si me mandas un mail ahi podemos seguir hablando.
This printer is still available for sale!
Hola luisito. se podria ver la impresora? De donde eres?.
Recommended Posts
hacalox 0
Luisito estoy interesado, perdona que te spamee pero no se si sigues tu hilo de la ultimaker siendo que la has vendido.
Saludos y gracias
Link to post
Share on other sites