Jump to content
Ultimaker Community of 3D Printing Experts

twofoot

Member
  • Content Count

    12
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Hi folks. Quite suddenly, my machine now prints vertical faces at a slope as seen in the attached photos. Any ideas as to what could be causing this. The holes in the thicker section should also be round, not oval. I apologize if the brim makes the photo a bit confusing. Thanks! Chris
  2. twofoot

    Problem loading highres model

    Do you have the ability to limit "minimum feature" size when outputting to STL? I use Moi3D (www.moi3d.com) and when I output to STL, I set the minimum feature to .001" which greatly reduces the poly count without any apparent difference in the final model. Not to sound like "that guy", but I defy anyone to see a difference in the model from the original to one where I add this minimum feature limit. Try it, you'll be surprised! Cheers, Chris
  3. twofoot

    So this is Makerbot. Meh...

    Why can't my prints look like this?
  4. twofoot

    So this is Makerbot. Meh...

    I actually dialed down print head speed to 60mm/sec while printing and 100mm/sec when traveling to increase quality. The default settings were twice that! C.
  5. twofoot

    So this is Makerbot. Meh...

    It sounds like a "return to store" to me. :-P I'm very frustrated by the kids from Brooklyn. C.
  6. twofoot

    So this is Makerbot. Meh...

    This is printed at "HIGH" on a Replicator2. Boy did I buy the wrong machine. And listen to these sounds it makes: Lovely. Now how to return it and get a UM2? =( Chris
  7. twofoot

    OK, I deserve this

    So I went with a Replicator2 instead of UM2. To quote the knight in Indiana Jones, "He chose... poorly". Now I need to deal with Makerbot to return the machine and the three spools of filament I bought. Did I mention this was only the third print I made on it? Jeez! <hangs head in shame> -Chris
  8. twofoot

    Filament diameter for UM2?

    Perfect. Thanks! =)
  9. twofoot

    Filament diameter for UM2?

    So I ask, does the difference between 2.85mm and 3mm (nominal) filament matter to the UM2? Enquiring minds want to know. =) Chris
  10. Hi folks. Like everyone else, I'd love to have a sample part printed for me at high resolution in PLA on an Ultimaker2 before I plunk down my money for a machine. I've got test prints from a Replicator2 in my hands (not bad) and another one from Affinia on its way. The part is a 6" diameter (approx.) spoked wheel. you can see it in my album: http://umforum.ultimaker.com/index.php?/gallery/album/732-csc-album/ Neither of these machines has the build volume I need, and neither of those machines has the top resolution of the UM2. So, TWO points for Ultimaker. LOL Anyway, I will be happy to pay for your material and shipping costs, and maybe buy you a beer or a cuppa coffee. Please drop me a line. Thanks! Chris
  11. twofoot

    Scaling issue in Cura?

    Now that makes sense. I will set the STL up in mm prior to importing into Cura. Mercifully, it is a simple case of maths to get the correct dimensions to the machine. Thank you! Cheers, Chris
  12. twofoot

    Scaling issue in Cura?

    Hello all. I did a quick test by importing a known-working STL file of 6" diameter. When it was placed in the display of Cura, it came in at less than 1", and needed to be scaled by approx. 10x to reach the proper size. The drawing scale was inches, and I had not seen this issue in other program before. Thoughts? Will I have to create a generic 1x1x1 cube to set my machine's "scaling default"? Thanks Chris
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!