-
Posts
2,027 -
Joined
-
Last visited
-
Days Won
40
Content Type
Forums
Events
3D Prints
Posts posted by rigs
-
-
Sinon le U-PET est brillant pas beaucoup plus que le PLA il me semble, mais j'ai des portions rugueuses je sais pas trop pourquoi...
où se situe tes portions rugueuse ? aléatoire ?
-
Et j'ai eu le droit à la venue du maire avec un article sur moi et mon entreprise dans le buletin communal :cool:
L'heure de gloire jérôme !
-
Ok Rigs, merci :wink:
J'ai regardé sur le forum et j'ai vu qu'un Topic était deja présent.
Si j'ai tout compris, je devrais pouvoir éliminer ce phénomene avec Simplify3D qui lui permet de gérer les entrés/sorties
Salut Zizon
Oui et non j'ai envie de dire... cette Z-Scar c'est une plaie
Tu as deux option soit tu la masque ou soit tu l'atténue.
Pour la masquer tu dois effectivement la positionner dans un angle mais nous sommes d'accord que sur un vase il est très compliqué de trouver un angle !
Ou tu l'atténue en baissant la vitesse et la température.
-
Impressionnant ta commande rigs ! Les 2 lignes du bas, ce sont des spool de 2,2 kg ??
C'est ça psine
-
Le plateau est déjà à 70°C.
Pour la colle, je la mets sur plateau "chaud" ou "froid" ?
Peut importe yeti, même si je t'avoue ne pas avoir fais un vrai test quand aux propriétés d'accroche d'une colle chaude au froide...le seul truc que je sais c'est qu'une colle chauffée fait s'évaporer les solvants et donc il ne reste que vraiment de la colle...
-
-
j'utilise cette valeur par défaut, maintenant grâce à toi je viens d'apprendre qu'il était possible de descendre en dessous avec le XT couleur Merci jérôme !
-
Pour tout les XT jérome.
Cette petite bête n'aime vraiment pas les faibles débit d'extrusion.
Toujours garder en tête que c'est loin d'être aussi " accessible " que le PLA.
-
-
Ah oui quand mm.
Tu as beaucoup de commande toi aussi :eek:
Ou tout est perso?
Je n'arrive pas à imprimer le robot d'ultimaker alors j'ai fait du stock pour m'entrainer :mrgreen:
-
il est vrai que le translucide n'est pas le plus évident de la gamme.
Alors tu vas essayer ça jérôme, c'est la base :
t° 245
hauteur de couche 0.2 mm
vitesse 50
Ventilos 0 %
Débit 103%
La première couche ne doit pas descendre en dessous de 25 mm/s c'est important
Et si ça ne te conviens pas nous affinerons
-
depuis 6 mois j'en utilise jérome, racontes un peu tes misère mignon
-
le XT réagit énormément en fonction de la vitesse d'impression et de la hauteur de couche ( en gros au débit ) :
Tu peux jouer avec entre 235° et 255 ° et entre 35 mm/s et 55 mm/s.
Pour la température du lit entre 60 et 70 c'est bien.
Un petit conseil...met de la colle partout sous la surface de ta pièce...la colle s"'enleve plus facilement à l'eau...il m'est arrivé d'arracher du verre tellement cette saloperie colle bien
-
-
C'est une Z-Scar zizon, l'ennemi du vase ou autre pièce cylindrique.
Pour éviter ça il faut baisser le temperature et la vitesse d'impression.
-
Salut nounet et bienvenue.
Comme jérôme, regarde dans les liens utiles tu devrais avoir cette info sur le github.
++
-
Tout le temps car ta pièce doit garder la même temperature pendant l'impression et refroifir doucement afin d'éviter ce phénomène.
-
In case of the temperatures - you mean something like "current temp. / target temp." - right?
yes
For the nozzle temperature and bed temperature.
The name of the material profile can be quite long in recent versions - but this should be possible. Only display the name - or are there further intentions?
Only the name : PLA, ABS, UPET or CUSTOM by the user save in the SD Card ( XT, WOOD,PET....) material.txt
You think that there are other important information ?
Ultigcode or RepRapgcode
The date/time of the .gcode (last backup)
A wizard for the atomic method should be possible - but this would be a little bit exaggerated, wouldn't it?
yes, it's exaggerated.
This idea :arrow: :arrow: :arrow: the garbage.
The idea of fine-tuning the z-stage is also a little bit.... uncommon... isn't it?
yes it is
I have this option on the delta tower and it's very convenient when you print a large surface for the first layer.
If it's too difficult :arrow: :arrow: :arrow: in the garbage.
I knew it... This was unavoidable...
I thought the printing screen _is_ the screensaver...?
You're right - the period of time should be adjustable, but i'm unsure about the idea of an extra wallpaper...?
You write Tinker you choose
see you tomorrow !
-
Colle + vire les ventilos et garde le sourire
-
Ouahhh ! Ça c'est de la prise en charge !
-
Bienvenue angelo
-
hi the tinker
It's me the nightmare !
Sunday meditation....
The temperature lines :
For the nozzle and bed.
The priming screen :
Material profil display on the priming screen.
Tinkergnome
----------------------------
heatup nozzle...
PLA 0° / 210°
0° / 60°
----------------------------
Adjustable Z during printing :
I hear you say : but rigs, there are screws to adjust the bed
well, there are screws but it's an idea.
one rotation move with the button ( turn on the left ) = - 0.01 mm on Z
one rotation move with the button ( turn on the right ) = + 0.01 mm on Z
one click with the button = validation
Wizard for the Atomic method cleaning :
In the MAINTENANCE MENU
Step :
1) Head move to the front center --> next
2) change material or not ( if you use robert feeder ) --> next
3) Heat up nozzle.....30 second.....lowering of T° --> next or return to step 3
Screensaver :
Inspired from norpchen (aka Selmo) the lights are dimmed after 30 minutes without any user activity
and i have added the input acceleration feature during temperature selections
in the maintenance menu (Heatup nozzle/buildplate) - let me know how you like it...
With screensaver and a option of time : 30 second - 1 minutes - 15 minutes
If you like this idea, i draw the wallpaper...
that's all for today :mrgreen:
-
Anders
I am late to this thread, but if possible I would love to get two to experiment with, can't find any mention of the cost I am happy to pay you of course
Stu
Me too
-
More information during print
in Firmware
Posted
hi tinkergnome
wednesday meditation...
In the menu " Maintenance "
selected option " move axes "
The cheap display :
- +
Z--------------X------------Y
0.20 0.00 1.52
Choose your feed rate: 0.01 or 0.1 or 1.0 or 10
And the magic option....initialize origin !
what do you think ?