-
Posts
83 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by amagro
-
-
-
Hello @smartvionics
I'm working with Cura for a biological project and I'm was also suffering with the issue of the single wall with only one move, till I found this post.
Because i'm working with high fluidics materials, long travel moves could result in oozing material, so maybe you could help me on this.
For simple tests I pretend to only print some lines, like on the below image.
The problem is after finish print one line the extruder will return to the initial point in order to pass to the next line, is there any way to the extruder pass directly to the next nearest line?
red arrows: extrusion direction.
blue arrows: travel moves.
green arrows: desired extrusion and travel moves.
Thanks again 😉
-
-
Here's the log file.
BTW, the Show Configuration Folder is not opening, I went manually to the Cura AppData folder.
-
After config an Octoprint connection with a printer, cannot open anymore the "Monitor" page, Cura instantly crashes.
Is there any log file that I can send for debugging?
Also happens with 3.4.1. -
Hello,
Is there any way to save the standard post processing plugins, with the plugin state, in a Cura Project?
Thanks
-
A workaround for your first problem: https://github.com/Ultimaker/Cura/issues/3451
-
I'm also had for two times this issue only with long prints.
On the bigger gcode that I send, the stop printing happens between the 174 and 178 mm.
It's very inconsistent since I had a lot of smal printers without any problems.
Tks
-
Hello @smartavionics.
With friends help I finally had the Cura with you modifications working on Linux.
If you like you could share your Cura archives with your last "Combing" work.Thanks
-
Hello @smartavionics,
I'm having some issues opening the Cura.sh file, this are the erros:
_________________________________________________________________________________________________________________
beei@beei-VirtualBox:~$ cd Desktop/cura/bin/
beei@beei-VirtualBox:~/Desktop/cura/bin$ ./cura.sh
Error in sys.excepthook:
Traceback (most recent call last):
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/core/__init__.py", line 16, in <module>
from . import multiarray
ImportError: libgfortran.so.3: cannot open shared object file: No such file or directoryDuring handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<frozen importlib._bootstrap>", line 969, in _find_and_load
File "<frozen importlib._bootstrap>", line 958, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 673, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 665, in exec_module
File "<frozen importlib._bootstrap>", line 222, in _call_with_frames_removed
File "/home/beei/Desktop/cura/lib/python3/dist-packages/cura/CrashHandler.py", line 21, in <module>
from UM.Application import Application
File "/home/beei/Desktop/cura/lib/python3/dist-packages/UM/Application.py", line 9, in <module>
from UM.Controller import Controller
File "/home/beei/Desktop/cura/lib/python3/dist-packages/UM/Controller.py", line 3, in <module>
from UM.Scene.Scene import Scene
File "/home/beei/Desktop/cura/lib/python3/dist-packages/UM/Scene/Scene.py", line 13, in <module>
from UM.Mesh.ReadMeshJob import ReadMeshJob # To reload a mesh when its file was changed.
File "/home/beei/Desktop/cura/lib/python3/dist-packages/UM/Mesh/ReadMeshJob.py", line 5, in <module>
from UM.Math.Vector import Vector
File "/home/beei/Desktop/cura/lib/python3/dist-packages/UM/Math/Vector.py", line 4, in <module>
import numpy
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/__init__.py", line 142, in <module>
from . import add_newdocs
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/add_newdocs.py", line 13, in <module>
from numpy.lib import add_newdoc
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/lib/__init__.py", line 8, in <module>
from .type_check import *
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/lib/type_check.py", line 11, in <module>
import numpy.core.numeric as _nx
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/core/__init__.py", line 26, in <module>
raise ImportError(msg)
ImportError:
Importing the multiarray numpy extension module failed. Most
likely you are trying to import a failed build of numpy.
If you're working with a numpy git repo, try `git clean -xdf` (removes all
files not under version control). Otherwise reinstall numpy.Original error was: libgfortran.so.3: cannot open shared object file: No such file or directory
Original exception was:
Traceback (most recent call last):
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/core/__init__.py", line 16, in <module>
from . import multiarray
ImportError: libgfortran.so.3: cannot open shared object file: No such file or directoryDuring handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/beei/Desktop/cura/bin/cura", line 134, in <module>
from cura.CuraApplication import CuraApplication
File "/home/beei/Desktop/cura/lib/python3/dist-packages/cura/CuraApplication.py", line 10, in <module>
import numpy
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/__init__.py", line 142, in <module>
from . import add_newdocs
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/add_newdocs.py", line 13, in <module>
from numpy.lib import add_newdoc
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/lib/__init__.py", line 8, in <module>
from .type_check import *
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/lib/type_check.py", line 11, in <module>
import numpy.core.numeric as _nx
File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/core/__init__.py", line 26, in <module>
raise ImportError(msg)
ImportError:
Importing the multiarray numpy extension module failed. Most
likely you are trying to import a failed build of numpy.
If you're working with a numpy git repo, try `git clean -xdf` (removes all
files not under version control). Otherwise reinstall numpy.Original error was: libgfortran.so.3: cannot open shared object file: No such file or directory
_____________________________________________________________________________________________________________________
Since I don't have enough knowledge to solve this error, could you please generate another gcode but now for a different printer?
I send you the Cura project with the stl and the 3D printer.marcador_1.0.curaproject.3mf.zip
Thank you very much.
-
-
Thanks again @smartavionics,
I will print the gcode that you send me.
So if you can, please send me the Linux archive with your Cura changes.
-
Hello @smartavionics,
Thanks for your prontitude on solving this issue.
This model is for a school project and I needed to print some of them till the end of this week.
Is there any chance you could send me the Cura executable with your changes?
Thanks
-
-
-
-
-
Where can we enable the "Infill support" ?
Tks
-
I always thought that line width should be 20% more (and not less) that nozzle size, this was based on tips from reprap; Slic3r; Simplify3D, etc
-
-
-
I'm using a BEETHEFIRST_plus, the extruder have a direct drive, and normally I don't have problems extruding any material, but with TPU is always more tricky.
Cura could also be more TPU friendly.
-
@tinkergnome Is Polyflex by Polymaker
-
Fusion 360 Slicer - Introduced G2 / G3 moves in G-code
in UltiMaker Cura
Posted · Edited by amagro
Autodesk was introduced G2 and G3 codes in Fusion 360 slicer.
Let's hope Ultimaker could also do it soon.