Jump to content
Ultimaker Community of 3D Printing Experts

Gambody_3D

Dormant
  • Content Count

    24
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Gambody_3D

  1. Version 1.0

    856 downloads

    This model was tested in Cura 2.3.1. To avoid printing problems, we recommend the following settings: Quality Layer Height: 0.1 mm Initial Layer Height: 0.3 mm Line Width: 0.4 mm Wall Line Width: 0.4 mm Outer Wall Line Width: 0.4 mm Inner Wall(s) Line Width: 0.4 mm Top/Bottom Line Width: 0.4 mm Infill Line Width: 0.4 mm Skirt/Brim Line Width: 0.4 mm Support Line Width: 0.4 mm Shell Wall Thickness: 0.8 mm Wall Line Count: 2 Top/Bottom Thickness: 0.8 mm Top Thickness: 0.8 mm Top Layers: 8 Bottom Thickness: 0.8 mm Bottom Layers: 8 Top/Bottom Pattern: Lines Outer Wall Inset: 0
  2. Version 1.0

    1,080 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  3. Version 1.0

    1,926 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  4. Version 1.0

    1,894 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  5. Version 1.0

    897 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  6. Version 1.0

    1,344 downloads

    Quality: Layer height - 0.1mm Initial layer thickness - 0.3mm Bottom/top pattern - lines Horizontal expansion - 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed - 50mm/s Outer shell speed - 30mm/s Inner shell speed - 20mm/s Top/Bottom speed - 20mm/s Support speed - 50mm/s Travel speed - 150mm/s Skirt speed - 30mm/s Amount of slower layers - 4 Infill: Infill Pattern - Grid Line distance - 3mm Infill Overlap - 20% Infill Layers - 0 Support Enable Support - check Placement - Everyw
  7. Version 1.0

    1,040 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  8. Version 1.0

    817 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  9. Version 1.0

    1,712 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  10. Version 1.0

    1,515 downloads

    Layer height: 0.1mm (for a clean result)* Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed: 20mm/s Top/Bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30 mm/s Amount of slower layers: 4 Infill: InfillpPattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers - 0 Support: Enable support: Check Placement: Everywhere
  11. Version 1.0

    1,015 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  12. Version 1.0

    3,576 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s
  13. Version 1.0

    1,450 downloads

    Quality: Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setup: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill
  14. Version 1.0

    2,353 downloads

    For a smoother and more quality printing, apply the following settings in CURA printing software: Quality Layer height: 0.1mm Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed; 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 100mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill o
  15. Version 1.0

    8,166 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s
  16. Version 1.0

    3,128 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s
  17. Version 1.0

    1,789 downloads

    Quality Layer height: 0.1mm Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed; 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 100mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang ang
  18. Version 1.0

    2,726 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed; 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 100mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infi
  19. Version 1.0

    2,697 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s
  20. Version 1.0

    4,654 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s
  21. Version 1.0

    4,157 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s
  22. Version 1.0

    1,475 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s
  23. Version 1.0

    1,014 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our pa
  24. Version 1.0

    1,441 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm Speed setups for figure: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Speed setups for axes: It is recommended to print the axes at 0.1mm layer height. Infill speed: 50mm/s Outer shell speed
×
×
  • Create New...