mrender
-
Posts
126 -
Joined
-
Last visited
-
Days Won
3
Content Type
Forums
Events
3D Prints
Posts posted by mrender
-
-
Hi
On the look out for a second hand Ultimaker.
Any model any condition considered.
Thank you
-
It would have been much better to provide all these improvements to the S3 and S5 rather than exclusive features of a new model. Many of the improvements included in the S7 could be argued as remedial work that is required on the S3 and S5 designs. For example the front fan airflow in the wrong direction, problems arising from flooded print head with such an enclosed design. Unreliable bed levelling sensor with vulnerable wiring. Alternatives to the glass build plate unavailable, unsuitable camera resolution and positioning etc.
-
2
-
-
Great firmware upgrade! Would like to see the reprint functionality return to the local/non digital factory setup though please. Reprint button on the the machine UI screen would be perfect!
-
Great firmware upgrade! Would like to see the reprint functionality return to the local/non digital factory setup though please.
-
Much better camera and angle!
-
Fixed with the new firmware thanks!
-
1
-
-
Still happening firmware 7.1.3
-
Same here!
-
Looks great!
Are the print head and build plate available as upgrades to the s5?..Surely Ultimaker don't expect s5 customers to buy an S7 to get these improvements?
-
2
-
-
Hi
I need to increase the travel speed between nozzle swaps on a dual extrusion print. The travel speed between swaps is much much lower than that set in the travel speed parameter. Anyone know how I can speed this up?
Many Thanks
-
skip cooldown is a very welcome update.. just need a re-print button now on the machine to quickly go again after a successful print!
-
1
-
-
thanks for the update! yes fingers crossed.
-
-
a known bug?
-
That's great thanks for the help!
-
Hello does anyone have a link to older versions of ultimaker firmware? New firmware is not working correct on my machine. Thank you
-
Do you know the reason for reducing the size of the radiator?
-
Ah, the cooling radiator not being big enough would explain it thanks.
-
Fan, filament, enclosure all fine.
-
Hi, No just PLA.
-
Bought a couple of the 0.4mm cc cores from 3Dsolex for my 5S a couple of weeks ago. Filament gets stuck in the core tube causing retract and core removal issues. Customer support is a joke!
-
I have had the same issue and cannot figure it out either! Fiddling around with line widths, temps, print speed, retract values and seam placement made improvements. I can get finer detail, but I cant say that the overall finish over large areas is as good as Cura 4 was.
-
..I should also say that i can see the current temp in the core setting page, can set a value there and see the current temp change.
-
Hi I wonder if anyone has had this issue where the tune screen on S5 does not read the core temp when trying to set temp offset?
I can enter an offset value but get no feed back to tell me what the current and target values are.
thanks
Firmware 8.1.0 - Where did everything go?
in Firmware
Posted
8.1.2 is great many thanks. Also Digital Factory seems much more reliable lately.