iPa

I have found about this issue: issue #8745 closed "the issue is resolved by the upgrade of Qt to 5.15" Hope this upgrade for the next beta released 😀 thank you

Exactly, issue #8745 closed "the issue is resolved by the upgrade of Qt to 5.15" Hope for the next beta released 😀

I have never had this issue with 4.9, but now I use Arachne beta, and I got this really annoying bug, need to exit and restart Acura after only few minutes. - Full Disk Access" did not solve the problem. - The "Custom Printjob Naming" plugin doesn’t do the trick ( in fact has worked one times ) - I don’t have external monitors

is there a discord channel for arachne ?

Arachne engine is working really well, I have just saw one times a bug with gradual infill, that all. But I think not linked to Arachne engine I have some annoying general behavior bugs. - After a while I can not select an object by clicking on it anymore, but it's working by the object list, the problem is you can not move or rotate object anymore (in fact mouse is not working anymore on the build plate area). Need to restart Cura. - Multiply model doesn't work at all (do nothing). - After installing archanee beta, Cura 4.10 doesn't start anymore. A nice day ps: mac Bigsur with arcane_engine_beta

Thank you for this, a very great improvement for Cura.

Very interresting, exactly what I was waiting for !

First print on the way 😀

Hello, Very interesting projet, is it still alive ? Cann we install it in parallel with the stable version ? Do they share profiles or should they be imported into this beta version?

That is one of the most stupid thing I have never seen ! Why there is some materials if you can not use it !!!! I spend a lot of times to understand this stupid behavior. Not supported Not supported ...

I tried to use "By Layer"instead of "At Height" and it works perfectly ! Thank you @GregValiant

Hi, I tried to insert two "pause at height", at 4mm then at 13mm. But the script has inserted this two sequences consecutively at 4mm (at the same place) in the gcode file. 13mm script was executed the first at 4mm, immediately after the 4mm script was executed! G1 F300 Z4 ;MESH:NONMESH G0 F9000 X130.029 Y152.562 Z4 ;TIME_ELAPSED:835.435373 ;TYPE:CUSTOM ;added code by post processing ;script: PauseAtHeight.py ;current z: 15 ;current height: 14.8 M83 ; switch to relative E values for any needed retraction G1 F2100.0 E-0.8 G1 F300 Z16 ; move up a millimeter to get out of the way G1 F9000 X10.0 Y10.0 M104 S0 ; standby temperature M117 Insert coin M0 ; Do the actual pause M109 S220 ; resume temperature G1 F2100.0 E0.8 G1 F2100.0 E-0.8 G1 F9000 X130.029 Y152.562 G1 F300 Z15 ; move back down to resume height G1 F2100.0 E0.8 G1 F2100.0 ; restore extrusion feedrate M82 ; switch back to absolute E values G92 E630.15955 ;TYPE:CUSTOM ;added code by post processing ;script: PauseAtHeight.py ;current z: 4.2 ;current height: 4.0 M83 ; switch to relative E values for any needed retraction G1 F2100.0 E-0.8 G1 F300 Z5.2 ; move up a millimeter to get out of the way G1 F9000 X10.0 Y10.0 G1 F300 Z15 ; too close to bed--move to at least 15mm M104 S0 ; standby temperature M117 Insert magnet M0 ; Do the actual pause M109 S220 ; resume temperature G1 F2100.0 E0.8 G1 F2100.0 E-0.8 G1 F300 Z5.2 G1 F9000 X130.029 Y152.562 G1 F300 Z4.2 ; move back down to resume height ASX1_cointraps_10baht.gcode