itsrichie

Thank you! Very good to know about losing the plugins until they get updated in the marketplace. Im just getting used to the anti warping tabs you can add to the parts to help with warping. Very nice feature. I will add i have not tried the glue-stick option and i still think the warping is dependent upon slice settings mixed with filament quality. Thanks again for sharing!

Hello all, i noticed this thread is a few years old but i am having this same issue as of a couple days ago. After the print, the filament retracts some but the nozzle stays attached to the parts. I have tried 3-4 parts to dial in and fix this, 6 total but it’s happening every time. Last print when the print head decided to move up and away, it pulled a small strand off the top layer of the part with it. I am also working on warping when i dont use a brim. Seems no matter what i do it happens. One thing at a time i guess. Aside from adding/modifying the end gcode is there a way to fix this ? Its weird how it only started happening about 2-3 days ago. But its every print since it started. Test prints for pics are 2, 1 inch cubes on fast settings and a part of a building 80x10x5mm on fine settings. Any help would be great!

First off want to say hello to everyone and thank you for the masterclass that just came out. Well i just attended it and then shortly after, Cura 5 dropped! So i am now not really sure how current the masterclass was.. The issue I am having is after the outer walls of my parts are printed (first layer) as the nozzle travels to start the first solid layer, the nozzle oozes and so as the first solid layer prints, it travels over this oozed line and naturally leaves this visible line as it is under the solid layer. I have retraction on. -Combing set to “no outer surfaces” -Retraction Distance set to 6.5mm -Retraction speed changing from 25mm/s (factory setting) to 33 mm/s to see if this helps. -Retraction extra prime amount set to zero This line happens for me every time. Would be great to make it disappear!