Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Hot end parts

Hey!

I've been lurking on this forum for a bit. I bought my UM several months ago and was printing all sorts of cool parts. Recently I got a plug in the hot end and bought the V2. However, it's been 3 weeks since the parts were shipped and I was dumb enough to not pay for tracking, so i'm guessing it's a loss. During those 3 weeks, I broke the nozzle and the brass threaded pipe, and I really want my machine up and running. Does anyone know where I can source the essential parts from a USA vendor? I'll probably end up paying for another V2, but it will take weeks for it to ship to me. If no one knows where I can source the threaded brass pipe and nozzle in USA, then can someone give me the correct sizes? Thank you very much!

Mike

  • Link to post
    Share on other sites
    Posted · Hot end parts
    I've been lurking on this forum for a bit. I bought my UM several months ago and was printing all sorts of cool parts. Recently I got a plug in the hot end and bought the V2. However, it's been 3 weeks since the parts were shipped and I was dumb enough to not pay for tracking, so i'm guessing it's a loss. During those 3 weeks, I broke the nozzle and the brass threaded pipe, and I really want my machine up and running. Does anyone know where I can source the essential parts from a USA vendor? I'll probably end up paying for another V2, but it will take weeks for it to ship to me. If no one knows where I can source the threaded brass pipe and nozzle in USA, then can someone give me the correct sizes? Thank you very much!

    Did you email UM support and explained? what did they say?

    Makergear has good replacement parts: you need a 36mm barrel: http://www.makergear.com/products/operators-pack

    your nozzle is most likely still fine, but if you really need a fresh one: http://www.makergear.com/products/nozzles (The UM ships with a 0.4mm nozzle, pick a 0.35 or 0.5mm, depending on your needs)

  • Link to post
    Share on other sites
    Posted · Hot end parts

    Enjoy for headsets click for more usually are widely helped bring along all through travel as they provide a kind of entertainment which you could watch flicks and listen to music.

    Enjoy article and enjoy beats headphones online, especially since headphones together with electronic merchandise costs a lot of money. Hope this short article is employed to you, and hope there is a great vacation ahead!

     

    it is recommended to retailer the hefty item inside a separate compartment with the carry case faraway from the pc itself. click for more

  • Link to post
    Share on other sites
    Posted · Hot end parts

    Good veiw and have exeprience for relax with a beats time. beats by dre headphones

    Click for more about beats beats dr dre

     

    it is strongly recommended to shop the weighty item in a separate compartment of the carry case from the laptop computer itself. monster beats collection

  • Link to post
    Share on other sites
    Posted · Hot end parts

    Enjoy article and enjoy click here, especially given that headphones together with electronic solutions costs adequate money. Hope the next few paragraphs is helpful to you, and hope you will have a great trip ahead!

    More about beats stuido and gadgets to ensure that they avoid getting damaged during your travels. beats by dre australia

     

    It is good to have a Carrying Case which has various areas and pockets, so you could store your headphones accessories alongside it, such for the reason that power adapter, mouse, universal adapter, and earbuds. click for more

  • Link to post
    Share on other sites
    Posted · Hot end parts

    These spam posts are getting annoying. The forum needs to have a better turing test for registration.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Talking additive | The 3D printing podcast
        Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
          • Like
        • 3 replies
      • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
        Save your seat for either broadcast on September 23.
        What will you learn?
        · Best practices for iterative print preparation and every lesson you should learn from each print
        · The right way to use per-object settings and when they are most useful
        · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
        · How to optimize print profile settings and whether to “keep” or “discard” changes
        · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
        · And a whole lot more tips and tricks!
         
        How can I join?
        This free masterclass will take place twice:
        1. 11am CEST (5pm SGT, 5am EDT)
        2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
          • Like
        • 0 replies
      • Do you use 3D printing at work? Let us know
        It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
        • 1 reply
    ×
    ×
    • Create New...