the wall thickness is set to 1.2 or 0.8 thats whats confussing me about it all
I mean the wall thickness of the model, the .stl, if that is below 0.4, Cura cannot generate a wall for it.
Edited by GuestOk thank you for the advice
to help you solve the problem of wall thickness of your model, you can use MeshMixer (free).
Import your still and under --> Analysis --> Thickness you can generate a desired wall thickness.
Also you can upload your model to Shapeways.com and choose a material with a specific minimum wall thickness and let the online repair generate an update.
Recommended Posts
peggyb 171
your wall thickness is probably less then 0.4 mm, the size of the nozzle. This makes it impossible to display what you ask for...
Link to post
Share on other sites