5 nozzel count

[Key23D 0]

Hello,

I have a 5 nozzel printer here, RoVa3D from ORD Solutions to be exact, and I have some problems getting all of the nozzels to work in one print. Before I started using Cura I used Slic3r + Pronterface, in Slic3r I was able to make 5 colour prints but in Cura it seems to crash right as I load in the fifth part of the print. The maximum amount of nozzels I got to work and print perfectly are 4. The reason I started to use Cura is because of it's quality, I never got a nice looking print from Slic3r.

I was wondering if anyone knows a way to work around this issue, I am probably not going to use the fifth nozzel too much but it would be great if I got it to work.

Kind regards,

Roman van der Rijt

Key23D

[nallath 1,123]

We've never tested more than 2 nozzles for any print. I don't think cura is going to work properly with 5 nozzles.

[Key23D 0]

I saw this post yesterday already https://ultimaker.com/en/community/7493-5-extruders. It's from july 2014 where Daid said he was working on rewriting the GUI code. Do you happen to know anything about this?

Cheers,

Roman van der Rijt

Key23D

[nallath 1,123]

The rewriting is the "new" cura. It's theoretically possible to have that amount of extruders, but we never tested it because ultimaker does not have a 5 nozzle printer.

[Key23D 0]

Thank you for your time and effort!

Cheers,

Roman van der Rijt

Key23D