First of all 305 is max height, not 315mm. But that is irrelevant to this issue.
Try turning off brim and skirt (set to adhesion none and then skirt lines to zero) and see if it is happy then. I mean it should fit - it might be the clips that are somehow messing it up - the collision avoidance doesn't realize I believe that you won't hit the clips.
You will have to do some weird stuff to get this to print - maybe tell the machine settings that your platform is actually some larger dimensions - or tell cura somehow that it is not a UM2extended but that it has the dimensions 223x223x305 (the official dimensions on the UM web page).
Play around with cura a bit.
I changed the max dimensions to 223x223x305 and it would not work but at 224x224x305 it will now print. Will extending the width and depth dimensions 1 mm past the actual dimensions effect the print or should this be fine?
Recommended Posts
gr5 2,224
First of all 305 is max height, not 315mm. But that is irrelevant to this issue.
Try turning off brim and skirt (set to adhesion none and then skirt lines to zero) and see if it is happy then. I mean it should fit - it might be the clips that are somehow messing it up - the collision avoidance doesn't realize I believe that you won't hit the clips.
You will have to do some weird stuff to get this to print - maybe tell the machine settings that your platform is actually some larger dimensions - or tell cura somehow that it is not a UM2extended but that it has the dimensions 223x223x305 (the official dimensions on the UM web page).
Play around with cura a bit.
Link to post
Share on other sites