Hi,
The problem you describe is most likely due to an partially clogged nozzle. Take a look at this tutorial about the so called "Atomic Method":
https://ultimaker.com/en/manuals/149-atomic-method
thanks nico . i had already done an atomic pull on the nozzle and cleaned it thoroughly so it cant have been that .
Recommended Posts
Nicolinux 288
Hi,
The problem you describe is most likely due to an partially clogged nozzle. Take a look at this tutorial about the so called "Atomic Method":
https://ultimaker.com/en/manuals/149-atomic-method
Link to post
Share on other sites