CuraEngine crashes with multi extruder

[titatovenaar 0]

Hi,

I'm having this problem when I use a dual extruder with CURA 2.1. (x32/x64 tested) When setting extruder = 0 there's no problem. When setting extruder > 0 the CuraEngine crashes. I also tried all compatibility (for CURAEngine) modes available in Windows10 included administrator mode. But no succes.

Any ideas how to solve this problem?

Greets,

[nallath 1,123]

Send us the gui & engine logs

See https://github.com/ultimaker/cura#logging-issues for more info.

[titatovenaar 0]

Hi, Here are the latest error logs

2016-05-14 21:38:55,594 - DEBUG - Attempting to kill the engine process

2016-05-14 21:38:55,594 - DEBUG - Killing engine process

2016-05-14 21:38:55,595 - DEBUG - Engine process is killed. Recieved return code 3221225477

2016-05-14 21:38:55,595 - ERROR - A socket error caused the connection to be reset

2016-05-14 21:38:55,601 - INFO - Started engine process: F:\Program Files\Cura 2.1\CuraEngine.exe

2016-05-14 21:38:55,623 - DEBUG - Backend connected on port 49674

2016-05-14 21:38:56,136 - DEBUG - Sending data to engine for slicing.

2016-05-14 21:38:56,136 - DEBUG - Sending data to engine is completed

2016-05-14 21:39:00,957 - WARNING - Arcus Error (6, native 10054): Receiving type failed

2016-05-14 21:39:01,059 - DEBUG - Attempting to kill the engine process

2016-05-14 21:39:01,059 - DEBUG - Killing engine process

2016-05-14 21:39:01,059 - DEBUG - Engine process is killed. Recieved return code 3221225477

2016-05-14 21:39:01,059 - ERROR - A socket error caused the connection to be reset

2016-05-14 21:39:01,065 - INFO - Started engine process: F:\Program Files\Cura 2.1\CuraEngine.exe

2016-05-14 21:39:01,086 - DEBUG - Backend connected on port 49674

2016-05-14 21:39:01,608 - DEBUG - Sending data to engine for slicing.

2016-05-14 21:39:01,609 - DEBUG - Sending data to engine is completed

2016-05-14 21:39:03,792 - WARNING - Arcus Error (6, native 10054): Could not receive data for message

2016-05-14 21:39:03,894 - DEBUG - Attempting to kill the engine process

2016-05-14 21:39:03,894 - DEBUG - Killing engine process

2016-05-14 21:39:03,894 - DEBUG - Engine process is killed. Recieved return code 3221225477

2016-05-14 21:39:03,895 - ERROR - A socket error caused the connection to be reset

2016-05-14 21:39:03,900 - INFO - Started engine process: F:\Program Files\Cura 2.1\CuraEngine.exe

2016-05-14 21:39:03,922 - DEBUG - Backend connected on port 49674

2016-05-14 21:39:04,433 - DEBUG - Sending data to engine for slicing.

2016-05-14 21:39:04,434 - DEBUG - Sending data to engine is completed

[nallath 1,123]

Technically speaking the dual extrusion isn't fully supported by 2.1, so it's not that surprising that it doesn't completely as intended.

This will be addressed in feature releases.